Directed 403.SUBARU1 Installation Manual
  1. Manuals
  2. Brands
  3. Directed Manuals
  4. Automobile Accessories
  5. 403.SUBARU1
  6. Installation manual
Directed 403.SUBARU1 Installation Manual

Directed 403.SUBARU1 Installation Manual

2010 subaru forester
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
403.SUBARU1
DB3
v1.38
2010 Subaru Forester

Advertisement

Table of Contents
loading

Related Manuals for Directed 403.SUBARU1

Summary of Contents for Directed 403.SUBARU1

  • Page 1 403.SUBARU1 v1.38 2010 Subaru Forester...

  • Page 2: Table Of Contents

    Contents Introduction Vehicle function compatibilities Pre-installation and application warnings Wiring diagram Locating components in the vehicle Vehicle connections Module programming For Convenience-Only programming, see next section. Module programming for convenience only (skip transponder) Key2GO Connecting the module LED diagnostics and troubleshooting Soft reset Hard reset Feature programming...

  • Page 3: Introduction

    Warning! This module can only be flashed and configured using DirectLink at www.directechs.com or using the Directechs Mobile application for smartphones. Refer to “Connecting the module” for more information. 403.SUBARU1 1.38 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 4: Vehicle Function Compatibilities

    Entry Monitoring Trunk/Hatch Pin Trunk / Hatch Release Brake Status (foot brake) Control of aftermarket alarm with OEM remote E-Brake Status Key2GO Ignition Status Immobilizer Bypass-Data No Key Req'd Remote Start Takeover 403.SUBARU1 1.38 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 5: Pre-Installation And Application Warnings

    [2] Tach wire: An optional connection required on some remote starters, which do not support a tach signal in D2D. [3] Keysense Input: Connection is only needed if keysense is not recognized through data at the time of programming. See LED Diagnostics & Troubleshooting section for more details. 403.SUBARU1 1.38 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 6: Wiring Diagram

    B279 - White 30-pin conn. Yellow, pin 5 (BCM, right of steering column) Immo. Data (veh. side): Orange/Black: 11 (+) Starter 2: White/Red, pin 6 (+) Keysense: Black/White, pin 2 403.SUBARU1 1.38 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 7: Locating Components In The Vehicle

    Locating components in the vehicle 403.SUBARU1 1.38 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 8: Vehicle Connections

    (1); black/red (2) H2/12 Blue/Red (-) W2W Only - Hood Output Remote Starter Input 10-pin black connector (H3) Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color 403.SUBARU1 1.38 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.
  • Page 9 (Data) TX H4/2 Black (-) Ground H4/3 Blue (Data) RX H4/4 (+) 12 Volt RF 2-pin white connector (H5) Module Conn./Pin Color Description H5/1 No Connection H5/2 No Connection 403.SUBARU1 1.38 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.
  • Page 10 6 pin plug, pin 6 white/red Starter ignition switch, white 6 pin plug, pin 2 white/black Tachometer instrument cluster, white 40 pin plug, pin 32 gray/red 403.SUBARU1 1.38 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 11: Module Programming

    Click Submit Key2GO Request. When the configuration is completed, reconnect the module.  The LED turns ON solid green for 3 seconds, then turns OFF. You have successfully completed the module programming sequence. 403.SUBARU1 1.38 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 12: Module Programming For Convenience Only (Skip Transponder)

    Release x5 Key IN START Turn ignition ON and wait until the LED turns OFF. Key OUT Turn ignition OFF. START You have successfully completed the module programming sequence. 403.SUBARU1 1.38 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 13: Key2Go

    Any first-time user must re-register to gain access to Key2GO, and some additional information will be required to complete the registration process, such as your Directed account number and store name. Key2GO is compatible with XKLoader2 and the online web tool, as well as XKLoader3 and the Directechs Mobile application.

  • Page 14: Led Diagnostics And Troubleshooting

    External Module Synchronization Description Troubleshooting OBDII feature not supported. The diagnostic data bus was not detected, therefore the SmartStart features will be limited. (Flashes red, red, then orange) x 10 403.SUBARU1 1.38 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.
  • Page 15 The smart key was not detected, which prevents the system from shutting down the vehicle. Flashes red x 3 Speed was detected. The vehicle was detected as moving, which prevents the system from shutting it down. Flashes red x 4 403.SUBARU1 1.38 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 16: Soft Reset

    Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds until the & LED starts to flash orange and red. Solid Flashes Release the programming button. The LED turns ON solid red. & Release Solid 403.SUBARU1 1.38 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 17: Feature Programming

    To exit feature programming, press and hold the programming button for 3 seconds or ensure there is no activity on the interface for 30 seconds. The LED will turn ON orange for 2 seconds to confirm the end of the programming sequence. 403.SUBARU1 1.38 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 18: Feature And Option List

    1. Type1* Brake Status Type 1. 2. Type2 If under a remote start condition the brake does not shut the vehicle down, program the Brake Status as Type 2. 403.SUBARU1 1.38 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 19: Limited One Year Consumer Warranty

    This Warranty gives you specific legal rights and you may also have other rights which vary from state to state. VOXX DEI LLC, 2351 J. Lawson Blvd., Orlando, Florida 32824 403.SUBARU1 1.38 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

  • Page 20: Quick Reference Guide (Customer Copy)

    3 possible ways you can send commands to your vehicle, using the: Park (P). • Factory remote. • Aftermarket remote. Press the Remote Start button on the transmitter.* • Directed SmartStart application via your smartphone. & Parking lights The parking lights will flash once to indicate the vehicle is Press...
  • Page 21 Notes 403.SUBARU1 1.38 2010 Subaru Forester ©2022 VOXX•DEI LLC. All rights reserved.

Table of Contents