Vantrue Element 2 User Manual page 36

Note:
EN
1. To ensure the camera works properly in park mode, please use the
hardwire kits or other stable and continuous power supply to power the
dash cam.
The low framerate mode is similar to the time-lapse recording function,
2.
but the difference is that there is no 5-minute entry mechanism for
time-lapse recording, which will be directly turned on after setting.
In low framerate mode, the camera also needs a stable power supply.
3.
Once the power is off or exhausted, the camera will shut down.
4.2.6 Time Lapse
When time lapse is selected, the camera will record according to your
selection of 1FPS/5FPS/10FPS/15FPS.
For example, if you select 1FPS and the current video resolution framer-
ate is 30FPS, the camera will generate a 30FPS video per second. Low
frame rate mode can greatly preserve the integrity of the video and
save space on the memory card.
The formula for calculating video duration is:
[Normal Recording Time = Time Lapse Recording Time (Sec) x Recording
Frame Rate FPS x Time Lapse Option]
(Time should be converted into seconds)
1440P+1440P 30FPS
00:00:37 14:39:07
- 31 -
80
2022-06-20 MP/H