Vantrue Element 2 User Manual page 26

EN
3, the lowest is 0, and the highest is 5.
-Prompt Tone: According to different situations, the dash cam is set with 5
kinds of prompt tones, which are power-on/off sound, keys sound, file
locked sound, format sound, and abnormal stop recording reminder. All
prompt tones are turned on by default.
-Frequency: Different countries have different frequencies. In order to
avoid affecting the video, you can choose 50Hz or 60Hz frequency
according to different regions.
-System Info: Check the current model, firmware version, and the
Vantrue official website.
-Certifications: You can view the certification information of E2 camera.
-Default Settings: Reset the device back to factory settings.
C. Files
Review the video and photo files recorded by the camera.
-Event: Critical event videos detected by G-Sensor activity or manually
locked by user.
The file name format is 20300128_140633_0008_E_A.MP4
-Normal: Standard videos recorded. This folder saves loop recording
video, parking mode video, and time-lapse video. The file name format
of Loop Recording video is: 20300128_140633_0008_N_A.MP4,
20300128_140633_0008_N_B.MP4; the file name format of Parking Mode
video is: 20300128_140633_0007_P_A.MP4,
20300128_140633_0007_N_B.MP4; the file name format of Time-Lapse
video is: 20300128_140633_0006_T_A.MP4,
20300128_140633_0006_N_B.MP4.
-Photo: Photos files. The file name format of Loop Recording video is:
20300128_140633_0005A.JPEG、20300128_140633_0005B.JPEG.
-All: All the standard videos and critical event videos recorded.
Note: The suffix A represents the files recorded by the front camera, the
suffix B represents the files recorded by the rear camera.
- 21 -