Vantrue Element 2 User Manual page 33

Note: If the dash cam continues to be hit during the collision detection
recording, it will exit the collision detection mode and enter normal
recording, restarting the 5-minute entry mechanism.
Motion Detection
When the motion detection is turned on, the
the recording interface, indicating that the dash cam is currently in
motion detection mode. Motion detection has three levels: low/medi-
um/high that can be adjusted, and the corresponding detection ranges
for motion detection is 6.6ft/13ft/19.7ft.
When the motion Detection is turned on, and no movement is detected
after 5 minutes of recording, then an orange icon will appear in the
center of the screen, and the screen will turn off after 3 minutes.
1440P+1440P 30FPS
00:00:37 14:39:07
1440P+1440P 30FPS
14:39:07
00:00:37
- 28 -
80
06-20-2022 MP/H
icon will be displayed on
80
06-20-2022 MP/H
EN