Connect The Computer - Canon CanoScan D646U Quick Start Manual

4. Connect the Computer

1. Connect the scanner to the computer with the
supplied USB interface cable.
2. Connect the AC adapter to the scanner.
Only use the AC adapter provided with the scanner. Use of other AC adapters may lead to
a malfunction.
• The scanner does not have a power switch. The power is activated as soon as the AC adapter is plugged in.
5. Try Scanning
1. Place your item (photo or picture) on the glass.
Place the item face down and align its top edge with
the alignment mark at the front left corner of the glass.
2. Open the [ArcSoft PhotoStudio] folder and
double-click the [PhotoStudio] icon.
PhotoStudio 2000 will start.
USB Interface Cable
Alignment Mark
Wide Flat Connector
Small Square Connector
AC Adapter
Power Terminal
Bottom
Top
D646U Quick Start Guide
9