How To Connect To Wi-Fi - Canon IRIScan Anywhere Duplex User Manual

How to connect to Wi-Fi

The scanner works as an Access Point (AC). You can connect your computer or your mobile
devices to the scanner via Wi-Fi without the need for an additional access point. (No
Internet access)
To set the Wi-Fi connection to ON, slide the Wi-Fi switch to the ON position (See
1
Upper front view).
If the connection is successful, the Wi-Fi LED comes on permanently in blue.
On your computer or mobile devices (network settings), make sure that IRIScan-xxxx
2
has been selected as the wireless network name (xxxx shows the last four digits of
the Mac address on the back of the scanner).
Connect.
Enter the default password: 12345678.
3
The scanner and your device are now connected via Wi-Fi.
Page 19