Rear optical unit (04_27, 04_28)
NOTE
BEFORE REPLACING A BULB, CHECK THE FUSES AND THE STOP LIGHT EF-
FICIENCY.
For replacement:
•
Rest the vehicle on its centre stand.
•
Undo and remove the screw «1».
•
Use a screwdriver as a lever on the locking tongue «2».
04_27
NOTE
REMOVE THE PROTECTION GLASS WITH CAUTION SO AS NOT TO BREAK
THE FITTING TOOTH.
•
Remove the protective glass «3».
•
Extract the bulb «4» from its fitting.
NOTE
INSERT THE BULB «4» IN THE BULB HOLDER «5» SO THAT THE TWO GUIDING
PINS COINCIDE WITH THEIR GUIDES ON THE BULB HOLDER.
83