Table of Contents
Advertisement
14
www.raider.bg
3.4. Installing the trimmer head.
Screw clockwise counterclockwise trimmer head to the shaft using locking lever (see t.3.8.). If
the length of the cord is not enough press in the middle of the trimmer head and pull the cord to the
desired length. If the length of the cord is greater than the diameter of the protective cover when you
turn the mower, the cord will be cut to required length of the blade mounted on the hood.
3.5. Adjust the belt the most comfortable position at work. Adjust the belt so that the cutting
equipment to be parallel to the ground.
The optimal length of the shaft angle of 35 ° thanks to the bevel gear cutting easier in a plane
parallel to the ground.
Advertisement
Table of Contents
