Hardware Installation; Din-Rail Mounting - Planet IAP-1800AX User Manual

User Manual of IAP-1800AX & IAP-2400AX
2.2

Hardware Installation

This section describes how to install the Industrial 802.11ax Wireless AP. There are three methods to
install the Industrial 802.11ax Wireless AP -- DIN-rail mounting, wall mounting and side wall mounting.
Basic knowledge of networking is assumed.
Please read the following sections and perform the procedures in the order being presented.
(The device shown on this chapter is just a representation of the said device.)

2.2.1 DIN-rail Mounting

Step 1: Lightly slide the DIN-rail into the track.
Step 2: Check whether the DIN-rail is tightly on the track.
- 35 -