Hardware Installation
Before you proceed with the installation, it is necessary that you have enough
information about WAP-8000.
1. Plug in the waterproof connector on RJ-45 cable.
Strongly suggest using SFTP cable, for better protection of the data
wire. 25-meter SFTP cable also available by order, the part no is
CB-STP-25. Please contact with local dealer for more information
Note
2. Connect RJ-45 cable with the waterproof connector to the LAN port of WAP-8000
and another way connect to the "PoE" port of PoE Injector. Connect antenna to
N-type antenna connector.
3. Lock the waterproof connector into outside circle of the LAN port.
Step1
Connect
antenna
Step1
Step2
Step2