Chapter 3. Preparation
Before getting into the device's web UI, user has to check the network setting and configure PC's IP
address.
3.1 System Requirements
Workstations running Windows XP/2003/2008/2012/Vista/7/8/10/11, MAC OS X or later, Linux,
UNIX, or other platforms are compatible with TCP/IP protocols.
Workstations are installed with Ethernet NIC (Network Interface Card)
Serial Port Connection (Terminal)
The above workstations come with COM port (DB9) or USB-to-RS232 converter.
The above workstations have been installed with terminal emulator, such as Tera
Term, PuTTY or Hyper Terminal included in Windows XP/2003.
Serial cable -- one end is attached to the RS232 serial port, while the other end to
the console port of the Managed Metro Switch.
Ethernet Port Connection
Network cables -- Use standard network (UTP) cables with RJ45 connectors.
The above PC is installed with Web browser.
It is recommended to use Chrome 98.0.xxx or above to access the
the Web interface of the
software or firewall and then try it again.
Industrial 802.11ax Wireless AP
- 40 -
User Manual of IAP-1800AX & IAP-2400AX
Industrial 802.11ax Wireless AP
is not accessible, please turn off the anti-virus
. If