Table of Contents
Advertisement
4.5
SNOOZE
To snooze the alarm, press the SNOOZE button. The alarm will
rest before sounding again in 9 minutes. Press the STANDBY
button to turn off the snooze function.
RADIO
4.6
1. Press the STANDBY/FUNCTION button on the control panel
repeatedly until the frequency is shown on the display, or
press the FUNCTION button on the remote.
2. Tune the radio manually or by automatic tuning.
3. Switch off the radio by pressing the STANDBY button on the
remote once, or by long pressing the STANDBY/ FUNCTION
button on the control panel.
Manual Tuning:
To manually tune the radio use the SKIP + and SKIP – buttons.
Automatic Tuning:
To automatically tune the radio, press and hold the SKIP+ or
SKIP – buttons until the frequency one the display starts to run.
When a station of sufficient strength has been found the radio
will stop tuning.
4.7
Radio Pre-Set Tuning:
Up to 20 radio stations can be programmed.
1. Select the radio station you wish to store.
2. Press the MEM/PROG button on the control panel
repeatedly until 'P01' shows on the display, or press the
MEMORY button on the remote.
3. Use the M-UP and M-DN buttons to select (P01 to P20) for
where to store the current radio station.
4. Press the MEM/PROG or MEMORY button again to store a
station.
5. Repeat the above steps to store more radio stations.
Memory Recall:
• Use the M-UP or M-DN buttons to search through the
stored radio stations.
• The stations will remain stored as long as the power supply
is on. If the HI-FI power is cut off the stations will no longer
be stored.
+
MODE
-
M-DN
M-UP
ALARM
MEMORY
PROG
TIME
SNOOZE
SLEEP
FUNCTION
MUTE
+
MODE
-
M-DN
M-UP
ALARM
MEMORY
PROG
TIME
SNOOZE
SLEEP
COMPACT BLUETOOTH HI-FI SYSTEM
Advertisement
Table of Contents
