Adding Components; Adding The Optional Hard Drive - HP Compaq Presario,Presario 5013 Quick Start Manual

Adding
Components
The hard drive is used to
store information
permanently inside your
computer.
Did you know ...
You need a screw and a data
(ribbon) cable to install an
optional hard drive. The empty
bracket for the optional hard
drive already exists in your
computer chassis.
Tip
The existing hard drive data
cable has a color pull-tab to
help you identify the cable. You
must replace the existing data
cable for the optional hard
drive to function properly.
7-6 C U
OMPUTER PGRADES

Adding the Optional Hard Drive

1. Complete the "Accessing Internal Computer Components"
procedure before adding an optional hard drive. The optional
hard drive shown may differ slightly from your particular
optional hard drive.
L
Caution: Dropping the hard drive may cause the read/write heads
to dig into the media, resulting in damage to the heads and the
media, and loss of data.
2. Remove the screw that secures
the empty hard drive bracket to
the chassis included within the
system. Insert the second hard
drive, and line up the two pins
on the bracket with the holes on
the hard drive. Snap the optional
hard drive in place inside the
optional hard drive bracket.
3. Insert the screw from your
purchased kit to secure the
hard drive to the bracket.
M P —G S
Y RESARIO ETTING TARTED