HP Compaq Presario,Presario 4415 Quick Setup

Power
and Voltage
or
Start Up
IMPORTANT: When the computer starts, the system
automatically converts the file system on your hard
drive. The conversion may take several minutes. Do not
stop the process. When the conversion is completed the
computer will restart.
When prompted, begin your product registration
3
process. Online instructions will guide you through the
registration and preinstalled software setup process. The
setup time varies by computer configuration.
1
The rating label on the device shows which FCC class (A or B) the equipment falls into. Class B devices have an FCC logo or FCC ID on the label. Class A
devices do not have an FCC ID or logo on the label. Once the class of the device is determined, refer to the corresponding statement. For complete
details, read the Safety and Regulatory Information guide contained on the Documentation Library CD.
NOTE:
Your model may not include a voltage
selection switch. If a switch is available, the
voltage is factory set to the correct rating.
If in doubt, contact your local power utility.
2
©2002 Compaq Information Technologies Group, L.P. COMPAQ. Compaq, the Compaq logo and Presario are trademarks of Compaq Information Technologies Group, L.P. in
the United States and other countries. All other product names mentioned herein may be trademarks of their respective companies. Nothing herein should be construed
as constituting an additional warranty. Second Edition May 2002.
compaq.com
274893-372
Presario 4000 Series

Quick Setup