Upgrading Computer Memory - HP Compaq Presario,Presario 5013 Quick Start Manual

Upgrading
Components,
cont.
Random access memory
(RAM) is the working space
of your computer. Data and
instructions are stored
temporarily in memory. The
most powerful processor and
the fastest hard drive will
not perform well without the
workroom to keep the
program and data close at
hand.
There are several different
types of memory modules.
Your computer uses
Synchronous Dynamic
Access Memory (SDRAM).
Did you know ...
If a blank screen is displayed
after replacing the memory
module, the memory is
installed incorrectly. Repeat
the procedure to ensure that the
memory module is properly
positioned.
Tip
Upgrade the memory in your
computer with modules of the
type and speed that are
identical to the memory
originally installed in your
computer.
M P —G S
Y RESARIO ETTING TARTED

Upgrading Computer Memory

1. Complete the "Accessing Internal Computer Components"
procedure.
2. Pull outward on the release latches found on both ends of the
memory slot 2.
3. Align the memory module 1 with the memory slot on the
system board.
4. Push the module carefully and firmly into the slot, ensuring
that the latches 2 on both ends snap into place.
Note: Press gently to ensure the memory module is properly positioned.
C U 7-5
OMPUTER PGRADES