Contemporary Controls BASstat BAST-221C-BW2 User Manual page 21

loops back to first item at the end of items in menu. Press the MODE button to
enter a submenu item.
• Press the UP or DOWN button to change the setting in the submenu item or
hold to speed up setting value change. Press the MODE button to confirm the
setting and return to menu item selection. If no button is pressed for 10 seconds,
the display will return to the menu item selection. After another 10 seconds, the
display will return back to User mode. Settings are not changed unless
confirmed using the MODE button.
• To leave Engineering Mode, rotate till (End) menu item appears and press the
MODE button. Alternately, pressing no buttons for 10 seconds will return the
thermostat back to User mode.
Engineering Menu Flow Chart
UM-15090500-AA1
E01
_
+
E02
+
Previous
_
End
+
MODE
MODE
E01 Setting
MODE
MODE
E02 Setting
No button pressed
for 10s under menu
item selection
MODE
User Mode
Press Up/down
for over 5s
_
+
Page 20