6.5 Front Drive Bezels
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel
6.5.1 5.25" Drive Bezel Blank
Press the two retaining tabs on the inside of the large bezel 1 towards the outside of the bezel to
release the bezel blank. At the same time, pull the bezel blank in 2 to remove it from the front
bezel.
To install a bezel blank, reverse the removal procedure.
Service Reference Guide, dx6100
Removal and Replacement Procedures— Microtower (MT) Chassis
(Section 6.1, "Preparation for
(Section 6.3, "Access
Panel").
(Section 6.4, "Front
Bezel").
361293-002
Disassembly").
6–7