MT500 User's Manual V1.0
Chapter 4 Reading Mode
Trigger Mode
In Trigger Mode the LED will stay on when the trigger is pressed and held, and will turn off
automatically once a barcode is read or LED Auto-Off timeout expires if LED Auto-Off Control is
enabled.
Trigger Mode*
Toggle Mode
In Toggle Mode the LED will stay on when the trigger is pressed once, and will not turn off until a
barcode is read or LED Auto-Off timeout expires if LED Auto-Off Control is enabled.
Toggle Mode
Flash Mode
In Flash Mode the LED will stay on after a barcode is detected, and will start flashing if no barcode
is detected after LED Auto-Off timeout expires. The trigger is unfunctional unless Trigger Control is
enabled.
Flash Mode
32