MT8230B User's Manual V1.5
Chapter 3 Reading Mode
Trigger Mode
In trigger mode, MT8230B starts scanning barcode when trigger is pressed, stops scanning
barcode after trigger is released. When a barcode is successfully scanned or LED timeout expires,
the scanning stops.
Trigger Mode*
Toggle Mode
In toggle mode, MT8230B starts scanning barcode when trigger is pressed, and keeps scanning
barcode after trigger is released. When a barcode is successfully scanned or LED timeout expires,
the scanning stops.
Toggle Mode
Continuous Mode
In continuous mode, MT8230B keeps scanning barcodes continuously.
Continuous Mode
Continuous Mode – Scan Interval
Scan interval is the period of time between two consecutive scans. The configurable range is from
0 to 9900ms; default is 500ms (unit = 100ms). To configure scan interval, scan Set Scan Interval,
scan two numeric barcodes (see Chapter 5). For example, scan '0' and '5' respectively for 500ms.
25