HP Compaq dc7100 DT Reference Manual page 46

Desktop Management
Computer Setup Utilities (F10) Security Features (Continued)
Feature
Pre-Boot Authorization
Smart Cover
Embedded Security
Device Security
Network Service Boot
System IDs
For more information about Computer Setup, see the Computer Setup (F10) Utility Guide.
Support for security features may vary depending on your specific computer configuration.
3–14
Allows you to enable/disable the Smart Card to be used in
place of the Power-On Password.
Allows you to:
• Enable/disable the Cover Lock.
• Enable/disable the Cover Removal Sensor.
Notify User alerts the user that the sensor has detected that
the cover has been removed. Setup Password requires that
the setup password be entered to boot the computer if the
sensor detects that the cover has been removed.
This feature is supported on select models only. See the
Desktop Management Guide on the Documentation CD for
more information.
Allows you to:
• Enable/disable the Embedded Security device.
• Reset the device to Factory Settings.
This feature is supported on select models only.
See HP ProtectTools Embedded Security Guide, on the
Documentation CD for more information.
Enables/disables serial ports, parallel port, front USB ports,
system audio, network controllers (some models), MultiBay
devices (some models), and SCSI controllers (some models).
Enables/disables the computer's ability to boot from an
operating system installed on a network server. (Feature
available on NIC models only; the network controller must
reside on the PCI bus or be embedded on the system board.)
Allows you to set:
• Asset tag (18-byte identifier) and ownership Tag (80-byte
identifier displayed during POST).
See the Desktop Management Guide on the
Documentation CD for more information.
• Chassis serial number or Universal Unique Identifier
(UUID) number. The UUID can only be updated if the
current chassis serial number is invalid. (These ID numbers
are normally set in the factory and are used to uniquely
identify the system.)
Keyboard locale setting (for example, English or German) for
System ID entry.
361288-003
Description
Service Reference Guide, dc7100