1. Manuals
  2. Brands
  3. Gage Bilt Manuals
  4. Tools
  5. GB714SH
  6. Original instructions manual

Gage Bilt GB714SH Original Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ORIGINAL INSTRUCTIONS
S/N: 1003 AND ABOVE
PLEASE CONTACT GAGE BILT FOR
ALL OTHER SERIAL NUMBERS.
GB714SH
INSTALLATION TOOL
GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE
E-MAIL US FOR A DISTRIBUTOR NEAR YOU.
GAGE BILT
44766 Centre Court Clinton, Twp., MI. 48038 USA
Ph: +1 (586) 226-1500 Fax: +1 (586) 226-1505
MADE in USA
solutions@gagebilt.com / www.gagebilt.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GB714SH and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Gage Bilt GB714SH

Summary of Contents for Gage Bilt GB714SH

  • Page 1 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS. GB714SH INSTALLATION TOOL GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE E-MAIL US FOR A DISTRIBUTOR NEAR YOU. GAGE BILT 44766 Centre Court Clinton, Twp., MI. 48038 USA Ph: +1 (586) 226-1500 Fax: +1 (586) 226-1505 MADE in USA solutions@gagebilt.com / www.gagebilt.com...

  • Page 2: Table Of Contents

    Description and Technical Specifications ..........................4 Description of Functions ................................5 Safety Warnings ..................................6 Principle of Operation ................................7 How to set up the GB714SH ..............................8 How to use the GB714SH ................................9 Maintenance ..................................... 10 Filling ......................................11 Bleeding ....................................

  • Page 3: Warranty

    1 year after the receipt of the material by the customer. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING MERCHANTABILITY. GB714SH INSTALLATION TOOL S/N: 1003 AND ABOVE Rev. 4/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

  • Page 4: Description And Technical Specifications

    The GB714SH split handle riveter operates on 90 to 100 psi. (6.2-6.9 bar) Max. of air pressure, with 90 psi. (6.2 bar) providing maximum efficiency. At 90 psi. (6.2 bar) air pressure, the GB714SH does not exceed 81.5 dB(A) and consumes 6 cfm at 20 cycles per minute.

  • Page 5: Description Of Functions

    Handle Assembly Lever Hydraulic Hose “Pull” Air Line “RETURN” Manifold-Handle Bleed Screw Handle Assembly Air Inlet Image may not reflect actual tool. GB714SH INSTALLATION TOOL S/N: 1003 AND ABOVE Rev. 4/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

  • Page 6: Safety Warnings

    4. Support the weight of the tool in a stand, tensioner or balancer, because a lighter grip can then be used to support the tool. GB714SH INSTALLATION TOOL S/N: 1003 AND ABOVE Rev. 4/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

  • Page 7: Principle Of Operation

    Air Piston moves down Air exhaust Air exhaust Pressurized Oil Pressurized Air Unpressurized Oil Unpressurized Air Images may not reflect actual tool GB714SH INSTALLATION TOOL S/N: 1003 AND ABOVE Rev. 4/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

  • Page 8: How To Set Up The Gb714Sh

    HEAD CYLINDER DEFLECTOR WORK FASTENER LEVER RED SHIPPING PLUG USER QUICK DISCONNECT FITTING AIR INLET AIR HOSE Image may not reflect actual tool GB714SH INSTALLATION TOOL S/N: 1003 AND ABOVE Rev. 4/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

  • Page 9: How To Use The Gb714Sh

    6. Repeat steps 1-5. 4. Release lever as soon as fastener breaks. 5. Repeat steps 1-4. Image may not reflect actual tool or fastener GB714SH INSTALLATION TOOL S/N: 1003 AND ABOVE Rev. 4/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

  • Page 10: Maintenance

    WARNING: Tool must be maintained in a safe working condition at all times and examined on a daily basis for damage or wear. Any repair must be done by qualified personnel trained on Gage Bilt procedures. WARNING: Excessive contact with hydraulic oil and lubricants must be avoided.

  • Page 11: Filling

    Handle Assembly and Power Cylinder hole Oil Passage hole O’ring (S832) ***Keep air hole free from oil*** Images may not reflect actual tool GB714SH INSTALLATION TOOL S/N: 1003 AND ABOVE Rev. 4/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

  • Page 12: Bleeding

    Subtract dimension (A) from dimension (B). If stroke is not consistent within 1/64" (.396 mm) repeat bleeding procedure until stroke met. For your consideration, Gage Bilt offers a depth gage (Pt.# A-1935) to help simplify and more accurately check your tool stroke.

  • Page 13: Troubleshooting

    Replace worn or broken parts. Clean the surface the jaws ride on. Stems lodged side by side in the follower. Disassemble, remove stems, and reassemble. Incorrect follower. GB714SH INSTALLATION TOOL S/N: 1003 AND ABOVE Rev. 4/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

  • Page 14: Overhaul

    Perform overhaul in a clean, well lit area using care not to scratch or nick any smooth surface that comes in contact with an o'ring. Use of Lubriplate® (Gage Bilt part no. 402723) or other lubricant is recommended during reassembly to prevent tearing or distorting of o'rings.
  • Page 15 Reinsert pin (703543) into hole on handle assembly (700343). Re-attach the lever (704345) and tighten set screw (401771). Note: View above shows proper orientation of lever. GB714SH INSTALLATION TOOL S/N: 1003 AND ABOVE Rev. 4/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
  • Page 16 Valve spring installation tool (744251) will facilitate the proper installation of the spring (744144). Valve sleeve (743144) can be pulled out using valve sleeve removal tool (744152). GB714SH INSTALLATION TOOL S/N: 1003 AND ABOVE Rev. 4/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

  • Page 17: Disassembly And Parts Lists

    PARTS LIST GB714SH INSTALLATION TOOL S/N: 1003 AND ABOVE Rev. 4/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
  • Page 18 PARTS LIST GB714SH INSTALLATION TOOL S/N: 1003 AND ABOVE Rev. 4/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

  • Page 19: Dexron® Iii Oil Safety Data (Sds)

    Use material for its intended purpose or recycle if possible. Oil collection services are available for used oil recycling or disposal. Place contaminated materials in containers and dispose of in a manner consistent with applicable regulations. GB714SH INSTALLATION TOOL S/N: 1003 AND ABOVE Rev. 4/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

  • Page 20: Nose Assemblies And Accessories

    GB714SH ACCESSORIES Approved for use on Gage Bilt CE installation tools and/or other manufacturer’s CE approved tools of similar design. (Sold Separately) GRIP GAGES NOSE ASSEMBLY SELECTION CHART (Sold Separately) *OFFSET *RIGHT ANGLE STRAIGHT (Sold Separately) (Sold Separately) (Sold Separately)
  • Page 21 Accessories Cont. Approved for use on Gage Bilt CE installation tools and/or other manufacturer’s CE approved tools of similar design. (Sold Separately) Gage Bilt also supplies pin & collar swage inspection gages to certify correct swage installation (Sold Separately) Fill Bottle...
  • Page 22 Hand held weight - 2.00 lbs. (0.9 kg) Entire tool weight - 7.00 lbs. (3.2 kg) Pull load - 6,400 (28.4 kN) GB714SH INSTALLATION TOOL S/N: 1003 AND ABOVE Rev. 4/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
  • Page 23 This page intentionally left blank GB714SH INSTALLATION TOOL S/N: 1003 AND ABOVE Rev. 4/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
  • Page 24 Riveter Kits Available (Sold Separately) Gage Bilt offers a wide selection of standard and custom kits tailored to your needs. Contact us for more information. Approved Split Riveter Tool Backpacks For 5ft hose Split System Tools. (Sold Separately) DEXRON® IS A REGISTERED TRADEMARK OF GENERAL MOTORS CORPORATION. LOCTITE® IS A REGISTERED TRADEMARK OF HENKEL CORPORATION. TEFLON® IS A REGISTERED TRADEMARK OF E.I.

This manual is also suitable for:

1003

Table of Contents