More Troubleshooting For Your Drives - HP Brio BA200 User Manual

Troubleshooting Help Zone

More Troubleshooting for Your Drives

Be sure to disconnect the power cord and any telecommunication cables from your
computer before you remove the cover to check the cable connections or jumper
settings.
Warning
To avoid electrical shock and harm to your eyes by laser light, do not open the laser
module. The laser module should only be serviced by service personnel. Do not attempt
to make any adjustment to the laser unit. Refer to the label on the CD-ROM for power
requirements and wavelength. This PC is a class 1 laser product.
More Floppy Drive Troubleshooting
Checklist
More Hard Disk Troubleshooting
Checklist
F2
F2
38
www.hp.com/go/briosupport
F2