If the PC does not boot from the Brio Assist CD, you must change the order of devices
from which your PC tries to start up. To do so, restart your PC and press F2 when
Note
prompted to enter the HP Setup program. Change the
program
Setup Program" on page 22) ) ) ) .
Performing a Full Recovery
Restoring the original factory configuration or downgrading will completely erase the
main hard drive partition. It is highly recommended to:
Note
Reinstalling Drivers from the Brio Assist CD-ROM
menu so that
back up all your data before proceeding
remove all devices you have added
update your PC's BIOS (refer to page 22)
have driver software to hand for any add-on hardware.
README
Brio Assist CD-ROM
appears before
in the Setup
(refer to"HP
21