Restore To A Previous Date And Time; Performing A Recovery; Recovering Using The Recovery Discs; Recovering Using The Dedicated Recovery Partition - HP Pavilion dm3 User Manual

Restore to a previous date and time

To revert to a restore point (created at a previous date and time), when the computer was functioning
optimally, follow these steps:
1. Select Start > Control Panel > System and Security > System.
2. In the left pane, click System protection.
3. Click the System Protection tab.
4. Click the System Restore button.
5. Follow the on-screen instructions.

Performing a recovery

NOTE:
HP Recovery Manager to create a set of recovery discs (an entire drive backup) as soon as you set up
your computer.
Recovery Manager software allows you to repair or restore the system if you experience system failure
or instability. Recovery Manager works from recovery discs you created (select models only) or
purchased, or from a dedicated recovery partition on the hard drive or solid-state drive (SSD).
NOTE:
tried these features, try them before using Recovery Manager.
NOTE:
provided with this computer must be downloaded from the manufacturer's Web site or reinstalled from
the disc provided by the manufacturer.

Recovering using the recovery discs

To restore the system from the recovery discs:
1. Back up all personal files.
2. Insert the first recovery disc into the optical drive and restart the computer.
3. Follow the on-screen instructions.

Recovering using the dedicated recovery partition

On some models, you can perform a recovery from the partition on the hard drive from either the Start
button or f11. This restores the computer to its factory condition.
To restore the system from the partition, follow these steps:
1. Access Recovery Manager in either of the following ways:
●
●
2. Click System Recovery in the Recovery Manager window.
3. Follow the on-screen instructions.
Downloaded from LpManual.com Manuals
You can recover only files that you have previously backed up. HP recommends that you use
Windows has its own built-in repair features, such as System Restore. If you have not already
Recovery Manager recovers only software that was preinstalled at the factory. Software not
Select Start > All Programs > Recovery Manager > Recovery Manager.
– or –
Turn on or restart the computer, and then press
Menu" message is displayed at the bottom of the screen. Then press
<F11> for recovery" message is displayed on the screen.
esc while the "Press the ESC key for Startup
f11
Performing a recovery
while the "Press
79