Grandstream Networks WP810 Administration Manual page 55

Cordless wi-fi ip phone
Hide thumbs Also See for WP810:
Table of Contents

Advertisement

Validate Server
Certificates
SIP TLS Certificate
SIP TLS Private Key
SIP TLS Private Key
Password
Custom Certificate
Web Access Mode
Enable User Web
Access
HTTP Web Port
HTTPS Web Port
Disable SSH
SSH Public Key
Web Session Timeout
Web Access Attempt
Limit
Minimum TLS Version
Maximum TLS Version
Trusted CA Certificates
Trusted CA Certificates
Load CA Certificates
change Wireless & network and Advanced Settings and to access the Call
Settings menu along with the DND toggle function.
 Locked Mode: The phone menu is disabled.
The default setting is "Unrestricted".
After enabling this feature, phone will validate the server's certificate. If the
server that our phone tries to register on is not on our list, it will not allow
server to access the phone.
SSL Certificate used for SIP Transport in TLS/TCP.
SSL Private key used for SIP Transport in TLS/TCP.
SSL Private key password used for SIP Transport in TLS/TCP.
The uploaded custom certificate will be used for SSL/TLS communication
instead of the WP phone default certificate.
Sets the protocol for web interface. The default setting is "HTTP".
Administrator can disable or enable user web access. Default is Enabled.
Configures the HTTP port under the HTTP web access mode.
Configures the HTTPS port under the HTTPS web access mode. Default
setting is "443".
Disables SSH access. The default setting is "No".
This option allows you to use authentication keys for SSH access. The
public key should be loaded to phone's web UI while the private key should
be used in the SSH tool side.
Note: This will allow upcoming SSH access without password.
Configures timer to logout web session during idle. Default is 10 min.
Range is 2-60 min.
Configures attempt limit before lockout. Default is 5. Range is 1-10.
Allows users to choose the minimum TLS version for HTTPS provisioning.
Note: Minimum TLS version should be less or equal to Maximum TLS
version. The default setting is TLS 1.1
Allows users to choose the maximum TLS version for HTTPS provisioning.
Allows to upload and delete the CA Certificate file to phone.
Note: Users can either upload the file directly from web or they can choose
to provision it from their cfg.xml file.
Users are able to specify which certificate they are going to use:
WP810 Administration Guide
Version 1.0.7.83
P a g e
|
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wp822

Table of Contents