Sent Fax Quality Is Poor; Sent Fax Is Received In An Incorrect Size - Epson WF-C8690 User Manual

Note: Make sure the USB device has enough available memory and is not write protected.
• If the memory is full, try sending a monochrome fax using the Direct Send feature, sending your fax
by using the On Hook feature, sending your faxes by dialing from the external phone device, or
sending your faxes in smaller batches.
• If the product cannot print a received fax due to a product error, such as a paper jam, the memory full
error may appear. Clear any product errors, then ask the sender to resend the fax.
Parent topic:
Related references
Fax Sending Options
Related tasks
Saving and Viewing Received Faxes

Sent Fax Quality is Poor

If the sent fax quality is poor, try these solutions:
• Clean the scanner glass.
• Clean the ADF.
• Try changing the resolution or density setting on the control panel.
• Try changing the original type setting on the control panel.
• If you are sending a monochrome fax to a single recipient, try sending the fax using the Direct Send
feature.
Note: If you send a high-resolution monochrome fax without using the Direct Send feature, the
product may automatically lower the resolution.
• Try enabling the error correction mode (ECM) setting.
Parent topic:

Sent Fax is Received in an Incorrect Size

If your recipient receives a fax in an incorrect size, try these solutions:
• If you are trying to fax an A3-size document, make sure the recipient's fax machine supports the paper
size. If the message OK (Reduced Size) appears in the fax transmission report, the recipient's fax
machine does not support A3-size documents.
Solving Faxing Problems
Solving Faxing Problems
419