Before First Use - AEG BSE682020M User Manual

10 www.aeg.com
Symbol
4.3 Heat up indicator
If you turn on the heating function,
appears. The bars show that the
temperature in the oven increases or
decreases.

5. BEFORE FIRST USE

WARNING!
Refer to Safety chapters.
To set the Time of day refer
to "Clock functions"
chapter.
5.1 Initial Cleaning
Remove all accessories and removable
shelf supports from the oven.
Refer to "Care and cleaning" chapter.
Clean the oven and the accessories
before the first use.
Water hardness
Class
1
2
3
4
Name
Temperature
Temperature
Core temperature sensor
Light
Minute minder
Water drawer indicator
Calcium deposit
(mmol/l)
dH
0 - 7 0 - 1.3
7 - 14 1.3 - 2.5
14 - 21 2.5 - 3.8
over 21 over 3.8
Description
The current temperature is indicated.
You can change the temperature.
The core temperature sensor is in the
core temperature sensor socket.
You deactivated the light.
The minute minder function operates.
Shows the water level
When the oven is at the set temperature,
the bars go off the display.
Put the accessories and the removable
shelf supports back to their initial
position.
5.2 Setting the water hardness
When you connect the oven to the mains
you have to set the water hardness level.
The table below shows the water
hardness range (dH) with the
corresponding Calcium deposit and the
quality of the water.
Calcium deposit
(mg/l)
0 - 50
50 - 100
100 - 150
over 150
Water classi-
fication
Soft
Moderately
hard
Hard
Very hard