Eneo ISM-72F0021W0A Full Manual page 47

1/2.8” network module camera, day&night, wdr, h.265, poe, 12vdc
Hide thumbs Also See for ISM-72F0021W0A:
Table of Contents

Advertisement

MEGA-PIXEL NETWORK CAMERA
Full Menu Setup
2-4-3. Network
TCP/IP
> IPv4 ADDRESS :
• OBTAIN IP ADRESS VIA DHCP : Gets the IP address assigned by the DHCP
(Dynamic Host Configuration Protocol) server.
• STATUS : 'Allocated' shows that the IP address is obtained from the DHCP.
• IP ADDRESS, SUBNET MASK, GATEWAY : Displays the current IP address which
is obtained from the DHCP.
• USE THE FOLLOWING ADDRESS : Requires the input of a static IP address manually.
> IPv6 ADDRESS : Mark ENABLE check box to use IPv6 address and click SAVE button,
then new IPv6 address will be obtained.
> DNS :
• OBTAIN DNS ADDRESS VIA DHCP SERVER : Obtains the DNS address automatically
assigned by DHCP server.
• USE THE FOLLOWING DNS ADDRESS : Requires manual input as per below.
- DOMAIN NAME : Enter the domain for the host name
- PRIMARY DNS SERVER : Enter the IP address of the primary DNS server.
- SECONDARY DNS SERVER : Enter the IP address of the secondary DNS server.
> HOSTNAME : This camera can be accessed using a host name instead of an IP address.
The host name is usually the same as the assigned DNS name.
47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ism-72m2713w0aIsm-78f0021w0a234669234668

Table of Contents