Eneo ISM-72F0021W0A Full Manual page 45

1/2.8” network module camera, day&night, wdr, h.265, poe, 12vdc
Hide thumbs Also See for ISM-72F0021W0A:
Table of Contents

Advertisement

MEGA-PIXEL NETWORK CAMERA
Full Menu Setup
To add a subnet of network addresses, these must be added in CIDR
[ NOTE ]
(Classless Inter-Domain Routing) notation. For example: entering 192.168.1.0/24 will
add all the addresses in the range 192.168.1.1 to 192.168.1.254. Contact your network
administrator for more detail. If the network camera is accessed via a proxy server, the
IP address for the proxy server must be added as an allowed address.
ONVIF
> Mark ENABLE WS SECURITY to provide the ONVIF compliance.
Video Stream
> ENABLE RTSP AUTHORIZATION : If marked, the authorization is required when the
RTSP is requested.
> ENABLE JPEG SNAPSHOT AUTHORIZATION : If marked, the authorization is required
when the Jpeg snapshot image is requested.
> ENABLE JPEG/HTTP PUSH AUTHORIZATION : If marked, the authorization is required
when the Jpeg/HTTP PUSH image is requested.
Export / Import
> Mark ENABLE ENCRIPTION FOR EXPORT AND IMPORT FILE :
System configuration file, which is exported at SETUP>SYSTEM>MAINTENANCE>
SETUP EXPORT, is encrypted with the password herein.
THIS PASSWORD MUST BE USED when System configuration file is
[ NOTE ]
imported by other cameras if the file was exported with the password.
> If the checkbox is not marked, system configuration file is exported without encryption.
45

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ism-72m2713w0aIsm-78f0021w0a234669234668

Table of Contents