Table of Contents
Advertisement
Chapter 4
How can I
do that?
Done!
4 3 5
Wireless Advanced
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
Wireless
>
Wireless
3. Configure the advanced settings of your wireless network and click Save.
Note:
•
If you are not familiar with the setting items on this page, it's strongly recommended to keep the provided
default values; otherwise it may result in lower wireless network performance.
1 Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
2 Go to
Wireless
>
3 Click
Enable
to enable the Wireless MAC Filtering function.
4 Select
Allow the stations specified by any enabled entries in
the list to access
5 Delete or disable all entries if there are any entries already.
6 Click
Add New
and fill in the blanks.
1 ) Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-
00-07-5F in the MAC Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Leave the status as Enabled.
4 ) Click
Save
and click Back.
7 The configured filtering rules should be listed as the picture
shows below.
Now only client A and client B can access your network.
Advanced.
Wireless MAC
Filtering.
as the filtering rule.
Configure the Router
28
Advertisement
Table of Contents
