TP-Link WR850N User Manual page 20

300mbps wireless n router
Table of Contents

Advertisement

Chapter 4
Confirm Password
password you entered is correct.
Secondary Connection
an extra connection type, select
connection.
Connection Mode
Always on
- Connect automatically after the Router is disconnected. To use this
option, click the radio button.
Connect on demmand
connection after a specified period of the Internet connectivity
If your Internet connection has been terminated due to inactivity,
Demand
enables the Router to automatically re-establish your connection
when you attempt to access the Internet again. If you wish to activate
on
Demand, put a check mark in the circle. If you want your Internet connection
to remain active all the times, enter 0 in the
Connect Manually
immediately. This mode also supports the
on Demand
mode. The Internet connection can be disconnected automatically
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the Internet again.
Note:
• Only when you have configured the system time on the
time-based connecting function take effect.
• Sometimes the connection cannot be terminated although you have specified the
some applications are visiting the Internet continually in the background.
If you want to do some advanced configurations, please click Advanced.
MTU
- The default MTU size is 1480 bytes. It is not recommended that you change the
default MTU size unless required by your ISP.
Service Name/Server Name
configured unless you are sure it is necessary for your ISP. In most cases, leaving
these fields blank will work.
- Enter the Password provided by your ISP again to ensure the
- It's available only for PPPoE connection. If your ISP provides
Dynamic IP
- You can configure the Router to disconnect your Internet
- You can click
- The service name and server name should not be
or
Static IP
to activate the secondary
Max Idle Time
Connect/Disconnect
Max Idle Time
System Tools
>
Configure the Router
(Max Idle
Time).
Connect on
Connect
field.
to connect/disconnect
function as
Connect
Time Settings
page, will the
Max Idle Time
because
17

Advertisement

Table of Contents
loading

Table of Contents