Table of Contents
Advertisement
Extended Menu
AC Voltage Monitoring
Extended > Operation > Advanced > AC Voltage Monitoring
s
Set to On to monitor the projector's voltage status and obtain a log when a
warning, disconnection, or power blockage occurs.
If you regularly turn off the projector by turning off the power outlet (direct
shutdown), set to Off.
You can view the log in the projector's Info menu.
s Info > Voltage Warning Info
a
Lens Type
Extended > Operation > Advanced > Lens Type
s
Select the model number for the attached lens when using the following
lenses:
• ELPLS04
• ELPLU02/ELPLU03S/ELPLU04
• ELPLR04
• ELPLW04/ELPLW05/ELPLW06/ELPLW08
• ELPLM06/ELPLM07/ELPLM08/ELPLM09/ELPLM15/ELPLM10/ELPLM11
• ELPLL07/ELPLL08
Date & Time
Extended > Operation > Date & Time
s
You can adjust the projector's system time and date settings.
Daylight Saving Time
Adjust the daylight saving time settings for your region.
Internet Time
Turn on this setting to update the date and time automatically through an
Internet time server.
When you set Schedule Protection to On in the Password Protection
screen, you cannot change the time and date settings. Set Schedule
Protection to Off first.
a
Lens Calibration
Extended > Operation > Lens Calibration
s
You can view information about the lens currently in use.
It takes up to approximately 100 seconds. When calibration is finished, the
lens returns to the same position it was in before calibration.
The following lenses return to the standard position.
• ELPLX01/01S
• ELPLX01W/01WS
• ELPLX02/02S
• ELPLX02W/02WS
A/V Settings
Extended > A/V Settings
s
You can select to output audio and video to an external device when the
projector is in standby mode.
Select Always On to output audio and images to external devices when the
projector does not project any images.
94
Advertisement
Table of Contents
