Installing A Security Cable; Adjusting The Color Convergence (Panel Alignment) - Epson Home Cinema 2350 User Manual

4. Select On and press Enter.
5. If you see a confirmation screen, select Yes and press Enter. You must turn the projector off and
then on again to enable the setting.
Note: To turn the projector on when this setting is enabled, you must press and hold the power button for
about 3 seconds.
Note: If the Direct Power On setting is enabled, the projector turns on as soon as you plug it in even
when the Child Lock setting is enabled.
Parent topic:
Related references
Projector Feature Settings - Settings Menu

Installing a Security Cable

You can install two types of security cables on the projector to deter theft.
• Use the security slot on the projector to attach a Kensington lock. See your local computer or
electronics dealer for purchase information.
• Use the security cable attachment point on the projector to attach a wire cable and secure it to a room
fixture or heavy furniture.
Parent topic:
Related references
Projector Parts - Base

Adjusting the Color Convergence (Panel Alignment)

You can use the Panel Alignment feature to manually adjust the color convergence (the alignment of the
red and blue colors) in the projected image.
Note: You can adjust only the red or blue color convergence. Green is the standard color panel and
cannot be adjusted.
Note: Allow your projector to warm up for at least 10 to 15 minutes and make sure the image is in focus
before you use the Panel Alignment feature.
Projector Security Features
Projector Security Features
71