Using The Accessories - AEG BPK55232PM User Manual

Table of Contents

Advertisement

in the display. The appliance deactivates
automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
to the off position.
6.5 Setting the TIME DELAY
function
1. Set an oven function.
2. Press
starts to flash.
3. Press
the hours for DURATION time.
4. Press
shows flashing
5. Press
the minutes for END time.
6. Press
Appliance turns on automatically later
on, works for the set DURATION time
and stops at the set END time. At the set
time an acoustic signal sounds for 2
minutes.
display. The appliance deactivates.
7. Press any button to stop the acoustic
signal.
8. Turn the knob for the oven functions
to the off position.

7. USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.
7.1 Core temperature sensor
The core temperature sensor measures
temperature inside the food. When the
food is at the set temperature, the oven
turns off.
There are two temperatures to be set:
• the oven temperature (minimum 120
°C),
• the food core temperature.
again and again until
or
to set the minutes and
to confirm. The display
.
or
to set the hours and
to confirm.
and time setting flash in the
6.6 Setting the MINUTE
MINDER
Minute minder can be both set when the
oven is turned on and off.
1. Press
.
and "00" flash in the display.
2. Press
or
to set the seconds
and than the minutes.
When the time you set is longer than
60 minutes,
3. Set the hours.
4. The MINUTE MINDER starts
automatically after 5 seconds.
After 90% of the set time the signal
sounds.
5. When the set time ends the signal
sounds for 2 minutes. "00:00" and
flash in the display. Press any
button to stop the signal.
6.7 COUNT UP TIMER
To reset the Count Up Timer, press and
hold
and
. The timer starts to count
up again.
CAUTION!
Use only the core
temperature sensor supplied
and the original replacement
parts.
Directions for the best results:
• Ingredients should be at room
temperature.
• Core temperature sensor cannot be
used for liquid dishes.
• During cooking the core temperature
sensor must remain in the dish and
the plug in the socket.
• Use recommended food core
temperature settings. Refer to "Hints
and tips" chapter.
ENGLISH
13
flash in the display.

Advertisement

Table of Contents
loading

Table of Contents