Table of Contents
Advertisement
3-10 PC Health Status
This section shows the Status of you CPU, Fan, Warning for overall system status. This is only
available if there is Hardware Monitor onboard.
Show PC Health in Post
CPU Thermal-Throttling
x CPU Thermal-Throttling Temp
x CPU Thermal-Throttling Beep
Vcore
ChipVCC (V)
+5V
(V)
+12V
(V)
5VSB
(V)
VDIMM
(V)
VBAT
(V)
CPU Temperature
NB Temperature
System Temperature
CPUFAN Speed
SFAN1 Speed
SFAN2 Speed
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Show PC Health in Post
During Enabled, it displays information list below. The choice is either Enabled or Disabled.
CPU Thermal-Throttling
This item allow setting Thermal-Throttling function Enabled or Disabled.
CPU Thermal-Throttling Temp
This item allow to setting Thermal-Throttling function active when over the temperature you
choose the Default setting is "85°C", when the Thermal-Throttling function active, will decrease
the CPU performance.
CPU Thermal-Throttling Beep
To choose Enabled after Thermal-Throttling function active, will have a beep from speaker.
Current CPU Temperature/Current System Temperature/Current FAN1, FAN2 Speed/
Vcore/3.3V/+5V/+12V/-12V/VBAT(V)/5VSB(V)
This will show the CPU/FAN/System voltage chart and FAN Speed.
Phoenix – AwardBIOS CMOS Setup Utility
PC Health Status
Enabled
Disabled
85 ° C
Enabled
1.52V
1.78V
4.77V
11.79V
5.12V
2.65V
3.15V
40 ° C/104 ° F
33 ° C/91 ° F
30 ° C/86 ° F
0 RPM
0 RPM
0 RPM
F6:Optimized Defaults
34
Item Help
Menu Level >
F7:Standard Defaults
Advertisement
Table of Contents
