Table of Contents
Advertisement
3-6-1
DRAM Timing Settings
Auto Configuration
x DRAM CAS Latency
x RAS Active Time
x RAS Precharge Time
x RAS to CAS Delay
x Bank Interleave
DRAM Command Rate
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
DRAM CAS Latency
When synchronous DRAM is installed, the number of clock cycles of CAS latency depends on the
DRAM timing. The settings are: 2T and 2.5T.
RAS Precharge Time
If an insufficient number of cycles is allowed for the RAS to accumulate its charge before DRAM
refresh, the refresh may be incomplete and the DRAM may fail to retain date. Fast gives faster
performance; and Slow gives more stable performance. This field applies only when synchronous
DRAM is installed in the system. The settings are: 2T, 3T and 4T.
RAS to CAS Delay
This field let's you insert a timing delay between the CAS and RAS strobe signals, used when DRAM
is written to, read from, or refreshed. Fast gives faster performance; and Slow gives more stable
performance. This field applies only when synchronous DRAM is installed in the system. The
settings are: 6T, 7T and 8T.
3-6-2
PCIE Timing Settings
PCIE Reset Delay
Internal Video Mode
UMA Frame Buffer Size
AGP Aperture Size
CFX Clock Mode
Async CFX Clock
Video Display Devices
TV Standard
* Surroundview
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Internal Video Mode
The settings are: UMA, UMA+Hyper Memory (for A210GDAG PRO), Hyper Memory (for
A210GDAG PRO).
Note: Change these settings only if you are familiar with the chipset.
Phoenix – AwardBIOS CMOS Setup Utility
DRAM Timing Settings
Auto
CL-2.5
6T
4T
Auto
Enabled
2T
F6:Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
PCIE Timing Settings
Disabled
UMA,Hyper Memory
64MB
128MB
Async
250MHz
Auto
NTSC
Disabled
F6:Optimized Defaults
26
Item Help
Menu Level >>
F7:Standard Defaults
← No for A210PDAG
Item Help
← Hyper Memory for A210GDAG PRO
← No for A210PDAG
F7:Standard Defaults
Advertisement
Table of Contents
