Graco 17C407 Operation, Parts page 22

Operation
10. Turn prime valve horizontal. Trigger
gun into flushing pail to purge fluid from
hose.
11. Engage trigger lock.
12. Perform Pressure Relief Procedure,
page 9, to verify that there is no
residual pressure in the system.
13. Turn pressure control knob to the
lowest pressure setting and turn
ON/OFF switch to OFF position.
Disconnect power to sprayer.
22
14. Remove filter from gun and sprayer if
installed. Clean and inspect. Install
filter. See separate gun manual.
ti24717a
334603E