Table of Contents
Advertisement
Setup
6.
When unpacking sprayer for the first
time remove packaging materials from
inlet strainer. After long term storage
check inlet strainer for clogs and debris.
ti24638a
7.
Fill throat packing nut with TSL to
prevent premature packing wear. Do
this daily or each time you spray.
a.
Place the TSL bottle nozzle into the
top center opening in the finger
guard at the front of the sprayer.
b.
Squeeze bottle to dispense enough
TSL to fill the space between the
pump rod and packing nut seal.
12
8.
Make certain ON/OFF switch is OFF.
9.
Plug power supply cord into a properly
grounded electrical outlet.
10. Turn pressure control to lowest
pressure.
ti24639a
ti24586a
ti24651a
ti24603b
334603E
Advertisement
Table of Contents
