1. Manuals
  2. Brands
  3. TriangleTube Manuals
  4. Boiler Supplies
  5. Instinct INSRKIT134
  6. Replacement

TriangleTube Instinct INSRKIT134 Replacement

Control module
Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

Instinct
Control Module Replacement
Kit Part Number
INSRKIT134
Each Kit Includes:
• Control Module
Recommended Tools:
• Phillips Head Screwdriver
WARNING
!
Indicates a potentially hazardous situation which,
if ignored, can result in serious injury or substan-
tial property damage.
WARNING
!
For your safety, turn off electrical power supply
at service panel and allow unit to cool before pro-
ceeding to avoid possible electrical shock and
scald hazard. Failure to do so can cause severe
personal injury or death.
2022-05 Instinct Control Module Replacement
Revised 3/10/22
Description
Control Module Replacement
NOTICE
Indicates special instructions on installation, operation
or maintenance, which are important to equipment
but not related to personal injury hazards.
WARNING
!
Failure to follow instructions below can result in
severe personal injury or damage if ignored.
•
•
•
Model
Instincts Floor Standing
Models
Instructions are for a qualified installer/ ser-
vice technician only.
Read all instructions before proceeding.
Follow instructions in proper order.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Instinct INSRKIT134 and is the answer not in the manual?

Questions and answers

Related Manuals for TriangleTube Instinct INSRKIT134

Summary of Contents for TriangleTube Instinct INSRKIT134

  • Page 1 Instinct Control Module Replacement Kit Part Number Description Model Instincts Floor Standing INSRKIT134 Control Module Replacement Models Each Kit Includes: • Control Module Recommended Tools: • Phillips Head Screwdriver NOTICE WARNING Indicates special instructions on installation, operation Indicates a potentially hazardous situation which, or maintenance, which are important to equipment if ignored, can result in serious injury or substan- but not related to personal injury hazards.
  • Page 2 Instinct Control Module Replacement the OK button to enter the access code. 1. Preliminary Instructions 1. Verify that the replacement kit is correct for the model of boiler. See table on page 1. 2. Carefully open and unpack the PARTS BOX from its shipping carton.
  • Page 3 Instinct Control Module Replacement 6. Record all CH Settings in Table 1. Once completed, 12. Press the RIGHT then DOWN buttons to highlight press the RIGHT button to highlight the Previous the Cascade icon, then press the OK button. Screen icon, then press the OK button. 13.
  • Page 4 Instinct Control Module Replacement and pull the module out. 4. Installation of Control Module 1. Mount the control module into the case by secure- ing it behind the mounting clips on both sides of the case. 2. Reconnect the Molex connectors to proper posi- tion.
  • Page 5 Instinct Control Module Replacement Table 1: Controls Settings HEATING SETTING FACTORY DEFAULT MINIMUM SETTING MAXIMUM SETTING EXISTING SETTING Heating Operation Enabled Demand Type Thermostat & Outd. Curve Absolute Max CH Setpoint 185°F [85°C] 68°F [20°C] 188°F [87°C] CH1 Maximum Setpoint 180°F [82°C] 68°F [20°C] 188°F [87°C] CH1 Minimum Setpoint 80°F [27°C] 60°F [15°C]...
  • Page 6 Instinct Control Module Replacement Table 1 Cont: BOILER SETTING FACTORY DEFAULT MINIMUM SETTING MAXIMUM SETTING EXISTING SETTING Lockout Temp. 210°F [99°C] Modbus Address 0=BCST 0=BCST Flex. Relay 1(CH) Flex. Relay 2(DHW) Flex. Relay 3(P3) CH1/CH2/DHW Flex. Relay 4(ERR) ERROR Flex. Relay 5(Flame) FLAME Flex. Relay 6(P4) Error Relay On Lockout, Blocking and Warning...

Table of Contents