Table of Contents
Advertisement
Using Basic Projector Features
Remote Control Type
If you want to adjust the zoom/focus/distortion of the projected image using
the Epson remote control as shown below, select Advanced as the Remote
Control Type setting.
Execution Method
Extended > Operation > Advanced > Remote Control Type
s
Projecting Images
This section provides instructions to project images.
g g Related Links
• "Source Search"
p.56
• "A/V Mute"
p.56
• "Shutter"
p.57
• "Freeze"
p.57
• "Split Screen"
p.57
• "Volume"
p.57
• "Aspect"
p.57
• "Screen Type"
p.58
• "Projection"
p.58
• "Test Pattern"
p.58
• "Content Playback"
p.59
• "Display Background"
p.59
• "Startup Screen"
p.59
Source Search
When multiple image sources are connected to the projector, such as a
computer and DVD player, you can switch from one image source to the
other.
Execution Method
• Press the [Search] (remote control) or [Source Search] (control panel)
button on the control panel or remote control until you see the image from
the source you want.
• Press the button for the source you want on the remote control. If there is
more than one port for that source, press the button again to cycle through
the sources.
• Press the [Home] button on the remote control. Then select the source you
want to use from the screen displayed.
A/V Mute
You can temporarily turn off the projected image and sound. Any sound or
video action continues to run, however, so you cannot resume projection at
the point that you stopped it (EB‑PU2120W).
Execution Method
Press the [A/V Mute] button on the control panel or remote control. To turn
the image and sound back on, press [A/V Mute] again.
56
Advertisement
Table of Contents
