Table of Contents
Advertisement
Multi-Projection Features
• The projected images are not stable right after turning on the
projector. We recommend adjusting the projector at least 20 minutes
after you start projecting.
a
• We recommend displaying the following test patterns:
Grayscale, Gray Bars V, Gray Bars H, and White
• When adjusting the image height with vertical lens shift, adjust it by
moving the image from the bottom to the top.
If you adjust it from the top to the bottom, the image position may
move down slightly after adjusting.
• It is not recommended that you perform geometry correction for the
following reasons:
• Image quality may decline.
• If the correction value is too large, image calibration may be
difficult.
g g Related Links
• "Lens Shift"
p.59
• "Zoom"
p.60
• "Focus/Distortion"
p.61
Connecting Projectors to a Network
Connect all projectors to the network hub with LAN cables.
When a connection is established, check that all projectors have been assigned
their own IP address assigned.
If you are combining images from multiple projectors on a network,
you can assign one projector as the "master" and automatically adjust
all the images to match the "master" image. If the projectors are not
a
connected to a network, you can match each projector's images
manually.
g g Related Links
• "Wired Network Connection"
p.40
Image Composition
You can create a bright composite image and a large image from multiple
projectors.
Choose an adjustment method for composing images based on your
environment.
• If you have installed the optional external camera and the Epson Projector
Professional Tool software is available, you can automatically adjust image
by using the Camera Assist function of the Epson Projector Professional
Tool software.
• If you have not installed the optional external camera or the Epson
Projector Professional Tool software is not available, you can manually
adjust image using the projector's menu.
You can download the Epson Projector Professional Tool software and
its manual from the following website.
a
epson.sn
g g Related Links
• "Tiling Using the Epson Projector Professional Tool Software"
• "Tiling Using the Projector's Menu"
• "Stacking Using the Epson Projector Professional Tool Software"
• "Stacking Using the Projector's Menu"
Tiling Using the Epson Projector Professional Tool Software
You can project one large image from up to 15 projectors using the optional
external camera and the Epson Projector Professional Tool software.
p.126
p.127
p.131
p.131
126
Advertisement
Table of Contents
