Table of Contents
Advertisement
Extended Menu
You can project the same image from up to 15 projectors to create one large
image using the Tiling feature.
Tiling
When the optional external camera is installed, set to Auto to configure
tiling automatically.
If you do not install the optional external camera or tiling the images
automatically was unsuccessful, select Manual, and then select the Layout
and Location Setup settings individually.
Layout
Select the number of rows and columns you are setting up.
Location Setup
Select the position of each projected image as follows:
• Row Order to layout the screens from top to bottom, starting with 1 at
the top, in sequential order.
• Column Order to layout the screens from left to right, starting with A
on the left, in alphabetical order.
Location Info
You can view the name, IP address, and ID of the projector you set.
• Make sure nothing is blocking the optional external camera while
performing automatic tiling.
a
• Do not change any of the projector names or IP addresses, or the
images will not be adjusted automatically.
• The auto tiling function is not available when you use the following
optional lenses:
• ELPLL08
g g Related Links
• "Tiling Using the Projector's Menu"
Edge Blending
Extended > Multi-Projection > Edge Blending
s
p.127
You can blend the border between multiple images to create a seamless
screen.
Edge Blending
Set to Blending/Black Level or Black Level to enable the Edge Blending
feature.
Top Edge/Bottom Edge/Right Edge/Left Edge
Select the edge you want to blend on each projector.
• Blending to turn on the Edge Blending feature for the selected edge.
Gradation is applied to the blending range.
• Blend Start Position to adjust the point where edge blending begins in 1
pixel increments. The blending start position is displayed with a red line.
• Blend Range to select the width of the blended area in 1 pixel
increments. You can select up to 45% of the projector's resolution.
• Blend Curve to select a gradient for the shaded area on the projected
image.
Line Guide
Set to On to display a guide on the blended area.
Pattern Guide
Set to On to display a grid to match the blended area.
Guide Color
Select a combination of guide colors.
• Blend Start Position, Blend Range, Blend Curve, Line Guide,
Pattern Guide, and Guide Color are only available when Edge
Blending is set to Blending/Black Level.
a
• Set the Color Mode setting to Multi-Projection in the projector's
Image menu for all of the projectors.
• When you adjust the blending area using another device such as a
media server, select Black Level.
Black Level
Extended > Multi-Projection > Black Level
s
102
Advertisement
Table of Contents
