Selective Calling; Selcall Identification Number; Selcall Naming - GME XRS-330COB Instruction Manual

NOTE: You will only have a brief moment to monitor the channel for signals
because holding the key for more than a few seconds will switch the radio off.

SELECTIVE CALLING

Your radio has a Selective Calling system known as SelCall that operates like a
telephone. Your radio is pre-programmed with its own unique SelCall Identification
number. If this number is called by another radio, your radio will beep to alert you.
If you do not want to hear any other activity while waiting on a channel, you can
select the QUIET mode. Your radio will then remain quiet to all incoming signals
until your SelCall number is called.
You can store up to 20 of your most frequently called SelCall numbers in memory
and each number can be labelled for easy identification.

SELCALL IDENTIFICATION NUMBER

Your radio is factory programmed with its own unique SelCall Identification
Number. This number identifies your radio from others in your area. Your radio's
own SelCall Ident will be displayed for a few seconds to the lower-left of the
display when you first turn the radio on. You will need to make your Ident known
to anyone who may need to call you using SelCall.
NOTE: Although your radio is factory-programmed with a unique SelCall Ident,
you can change your Ident to another number if required, using the Menu/Selcall
option.

SELCALL NAMING

When storing SelCall numbers, you can add names to each one to make it easier
to identify whose number you are recalling. In addition, if an incoming SelCall
matches one of your stored numbers, the name will be displayed to identify the
caller.
31
XRS-330C