Send & Return
Use the
Send
jack to connect to the input of external effects processors/pedals. Connect the output of external effects to the
Return
jack on the amplifier. Time based effects
(e.g. delays and reverbs) are often best placed in the
Effects
Loop, whereas overdrive pedals, filters and wahs etc. are usually best placed between the guitar and the
amp's Input. Experiment with placement to achieve the desired sound.
Channel
Connect a latching footswitch (e.g. FS-1) to remotely switch between
Clean
and
Dirty
channels.The front panel channel switch is disengaged when using a footswitch. An
Orange FS-1 LED will illuminate when the
Clean
channel is selected.