Crush PiX 20L IMPORTANT SAFETY INFORMATION The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Terminals labelled as “Speaker Outputs”...
Page 6
Crush PiX 20L • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades, one wider than the other.
Page 7
AC mains wall outlet. This Class I electrical equipment must be earthed. The correct mains fuse value for your region are displayed on the unit, close to the AC Mains Input. Replace only with the same type and value. If the mains fuse repeatedly blows, contact your Orange dealer.
Crush PiX 20L FRONT PANEL FEATURES 1. Input Jack Socket Plug your instrument into this jack socket. 2. Gain Control This controls pre-gain level. 3. Overdrive Switch Use this switch to select the Overdrive(switch depressed) or the Clean channel(switch in the out position) 4.
Page 10
Crush PiX 20L 5. High Provides high frequency equalization if required. 6. Mid Provides middle frequency equalization with cut and boost. 7. Low Provides low frequency equalization as required. 8. Volume Controls the overall volume of the amplifier. 9. Aux In Use this 1/8"...
Crush PiX 20L REAR PANEL FEATURES 12. A/C Main Power Switch This switch turns the AC MAIN power on/off 13. AC Inlet and Fuseholder Connect the supplied standard 3-pin “IEC” plug here.
90 days from the date of purchase. The warranty status of any Orange product is subject to its being used for its intended purpose in suitable conditions. As the manufacturer we reserve the right to refuse to warranty any Orange...