Reverb
Adjusts the reverb level for both channels. Higher settings add longer trails for a spatial effect.
Tuner
Depress the ON/OFF button to engage the integrated chromatic Tuner.
Set the
Volume
to zero for silent tuning if required.
The appropriate red LED will illuminate on the display to indicate the note being played. If the green
#
LED also illuminates, this indicates a chromatic note, e.g. F Sharp
(F#).
The
>
arrow LED indicates the note is tuned too
low
in pitch.
The
<
arrow LED indicates the note is tuned too
high
in pitch.
Adjust the string's pitch in the direction shown by the arrows until the green
OK
LED lit.