Ac Parallel Operation - Honda EU1000iT1 Owner's Manual

AC PARALLEL OPERATION

Before connecting an appliance to either generator, make sure that the
appliance is in good working order and that its electrical rating does not exceed
that of the receptacle.
Most motorized appliances require more than their electrical rating for startup.
When an electric motor is started, the overload alarm indicator (red) may come
ON. This is normal if the overload alarm indicator (red) goes OFF within 4
seconds. If the overload alarm indicator (red) stays ON, consult an authorized
Honda Power Equipment dealer.
During parallel operation, the Eco Throttle switch should be in the same
position on both generators.
1. Connect the parallel operation cable (optional equipment) between the two
EU1000i generators following the instructions supplied with the parallel
operation cable.
2. Start the engines (see page 34) and make sure the output indicator (green) on
each generator comes ON (see page 40).
OPERATION
PARALLEL OPERATION CABLE
(optional equipment)
43