OPERATION
2. Plug the appliance into the receptacle.
3. Turn on the appliance.
If the generator is overloaded (see page 42), or if there is a short circuit in a
connected appliance, the overload alarm indicator (red) will go ON. The
overload alarm indicator (red) will stay ON, and after about four seconds, current
to the connected appliance(s) will shut off, and the output indicator (green) will
go OFF. Stop the engine and investigate the problem.
Determine if the cause is a short circuit in a connected appliance or an overload.
Correct the problem and restart the generator.
41