Figure 70. Removing the OCP card filler
Next steps
1.
Install the OCP
card.
2.
Install expansion card riser
3.
Install expansion card riser
Installing an OCP card
Prerequisites
● Follow the safety guidelines listed in
● Follow the procedure listed in
●
Remove expansion card riser
●
Remove expansion card riser
●
Remove the OCP
filler.
Steps
1. Slide the OCP card and push firmly until it is fully connected to the system board connector.
NOTE:
Ensure to lift the OCP card retention latch if it is in the lock position.
2. Press the OCP card retention latch to secure the card in place.
2.
1.
Safety
instructions.
Before working inside your
1.
2.
system.
Installing and removing system components
67