Changing The Feed Roller - ESAB A6 Mastertrac Tandem Instruction Manual

GB
4.3

Changing the feed roller

Single wire
S
Release the knobs (3) and (4).
S
Release the hand wheel (2).
S
Change the feed roller (1).
They are marked with their respective wire sizes.
Flux-cored wire for knurled rollers (Accessories)
S Change the feed roller (1) and pressure roller (5) as a pair for the wire size to be
used.
NOTE! A special stub shaft is required for the pressure roller
(order no. 0212 901 101).
S Tighten the pressure screw (4) with moderate pressure to ensure that the
flux-cored wire does not deform.
hfa9o1ea
- 15 -